2009 Saab 9-5 Owner's Manual - Page 211

95_US_MY09.book Page 211 Tuesday, April 15, 2008 11:03 AM Car care and technical information 211 IB3922 License-plate light The lens is not screwed in place. It is held in place with snaps. 1 One of the short sides of the lens contains a recess for a small screwdriver. Insert a screwdriver and prise out the lens. 2 Fit the new bulb. 3 When refitting the lens, the short side without the screwdriver recess should be inserted first. Side direction indicators 1 Slide the lamp fitting forward and pull out the back. 2 Remove the bulb. 3 Change the bulb. On refitting, make sure that the spring in the lamp fitting engages the edge of the opening in the body panel. Courtesy lights (front doors and floor) and luggage-compartment lighting 1 Insert a screwdriver carefully into the slot in the end of the lamp fitting. Ease the fitting off to gain access to the bulb. 2 Bend out one of the contacts and remove the bulb. 3 Change the bulb. On refitting, insert the connector-end of the lamp fitting first. IB522