2003 Subaru Impreza Owner's Manual - Page 118

Keys and doors To disarm the system: 1. Unlock the door with the key and then open the door. 2. The alarm will sound. 3. Insert the key into the ignition switch and cycle it from the "LOCK" to the "ON" position three (3) times within 5 seconds. keep the "UNLOCK/DISARM" button depressed for more than two seconds. The security system status indicator light will continue to flash two times per second indicating that the system is in the valet mode. To exit valet mode, open the driver's door and keep the "UNLOCK/DISARM" button pressed for more than two seconds. The indicator will stop flashing. J Sounding a panic alarm To activate the alarm, keep the "LOCK/ARM" button pressed for more than two seconds. To deactivate it, press the "LOCK/ARM" button or "UNLOCK/DISARM" button. The parking lights will also flash when the alarm is activated. Unless a button on the remote is pressed, the alarm will be deactivated after approximately 30 seconds. J Passive arming When passive arming mode has been programmed by the dealer, arming of the system is automatically accomplished without using the remote transmitter. Note that in this mode, DOORS MUST BE MANUALLY LOCKED. J Valet mode When you choose the valet mode, the security system does not operate. In valet mode, the remote transmitter is used only for locking and unlocking the doors (and rear gate on the wagon) and panic activation. The parking lights do not flash when remote transmitter is used for locking and unlocking. To enter the valet mode, open the driver's door and - CONTINUED - 2-17