2003 Subaru Impreza Owner's Manual - Page 401

Maintenance and service J License plate light 1) 2) 3) 4) Tail/stop light Rear turn signal light Backup light Rear side marker light 3. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. 4. Remove the bulb from the socket by pushing it and turning counterclockwise. Install a new bulb. 5. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 6. Close the cover and latch the lock. 7. Reinstall the rear combination light assembly and its side cover. 1. Remove the mounting screws using a phillips screwdriver. 2. Remove the cover and lens. 3. Pull the bulb out of the socket. Install a new bulb. 4. Reinstall the lens and cover. 5. Tighten the mounting screws. 11-72