2003 Subaru Impreza Owner's Manual - Page 73

Seat, seatbelt and SRS airbags ages), firmly tighten the straps after connecting the connectors. 3. Connect the top tether hook to the tether anchorage and firmly tighten the tether. For information on how to set the top tether, read the following "Top tether anchorages". 4. Before seating a child in the child restraint system, try to move seat back and forth to verify that it is held securely in position. If you have any question concerning this type of child restraint system, ask your SUBARU dealer. Each lower anchorage is located where the seat cushion meets the seatback. " marks to locate the two lower an1. Use the " chorages (bars) for the position where you want to install the child restraint system. 2. While following the instructions supplied by the child restraint system manufacturer, connect the connectors of the child restraint system to the lower anchorages. When the connectors are fastened, make sure that the adjacent seatbelts are not caught. If your child restraint system is of a flexible attachment type (which uses tether straps to connect the child restraint system proper to the lower anchor1-38 WARNING When you install a child restraint system, follow the manufacturer's instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.