2006 Subaru Baja Owner's Manual - Page 159

Instruments and controls Compass zone adjustment 1. The zone setting is factory preset to Zone 8. Refer to the "Compass calibration zone" map at the end of this manual to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the right button for 3 seconds then release, and the word "ZONE" will briefly appear and then the zone number will be displayed. 3. Press the right-hand button repeatedly to cycle the display through all possible zone settings. Stop cycling when the correct zone setting for your location is displayed. 4. Releasing the button for 3 seconds will exit the zone setting mode. jects that you view in convex mirror. Adjusting mirrors Outside mirrors Outside mirrors OM-U2737 Convex mirror (Passenger side) To adjust the mirrors by hand, push where indicated by the arrows. Remote control mirror switch The remote control mirrors operate only when the ignition switch is in the "ON" or "ACC" position. Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror. Do not use the convex mirror to judge the distance of vehicles behind you when changing lanes. Use the inside mirror (or glance backwards) to determine the actual size and distance of ob3-32