2006 Subaru Baja Owner's Manual - Page 282

Starting and operating Never exceed posted speed limits. Shift lock release Perform the following steps if the selector lever does not move from the "P" position even with the release button pressed, the brake pedal depressed and the ignition switch in the "ON" position: To override the shift lock: 1. Set the parking brake and stop the engine. 2. Take out the screwdriver from the tool bag. 3. Remove the cover by prying on the edge with the flat-head screwdriver. NOTE In order to prevent over-revving during acceleration of the vehicle, the transmission will automatically shift to the next higher gear if the Maximum Allowable Speed for the current gear is reached. Similarly, in order to prevent over-revving during deceleration of the vehicle, the transmission will remain in the current gear if the speed of the vehicle is in excess of the Maximum Allowable Speed for the gear to which the selector lever has been moved. Driving tips Always apply the foot or parking brake when the vehicle is stopped in the "D", "3", "2", "1", or "R" position. Always set the parking brake when parking your vehicle. Do not hold the vehicle with only the transmission. Do not keep the vehicle in a stationary position on an uphill grade by using the "D", "3", "2" or "1" position. Use the brake instead. The engine may, on rare occasions, knock when the vehicle rapidly accelerates or rapidly pulls away from a standstill. This phenomenon does not indicate a fault. UB7041BA - CONTINUED - 7-29