2008 Subaru Tribeca Owner's Manual - Page 48
2008 Subaru Tribeca Manual
Page 48 highlights
1-24 Seat, seatbelt and SRS airbags 2. Pull out the seatbelt slowly from the overhead retractor. low as possible on your hips, not on your waist. ! Unfastening the seatbelt 3. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click is heard. Make sure that the " " mark on the connector (tongue) and the " " mark on the buckle are aligned. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 4. Insert the center seatbelt tongue plate in the center seatbelt buckle marked "CENTER" on the left-hand side until it clicks. Push the release button of the center seatbelt buckle (on the left-hand side) to unfasten the seatbelt. 5. To make the lap part tight, pull up on the shoulder belt. And place the lap belt as