2009 Subaru Outback Owner's Manual - Page 205

5-10 Audio FM/AM radio operation & FM/AM selection & Tuning ! Manual tuning NOTE While you are holding down either side of the TUNE/TRACK button, the tuning frequency will not stop changing even if the frequency of a receivable station is reached. ! Stereo indicator The stereo indicator "ST" will illuminate when an FM stereo broadcast is received. ! Seek tuning (SEEK) Push the "FM AM" button when the radio is off to turn on the radio. Push the "FM AM" button when the radio is on to select FM1, FM2 or AM reception. Each brief press of the "FM AM" button changes the radio in the following sequence starting from the last radio band that you selected. Press the " " side of the TUNE/TRACK button to increase the tuning frequency " and press the tuning button marked " to decrease it. Each time the button is pressed, the frequency interval can be changed between 10 kHz in the AM mode and 0.2 MHz in the FM mode. " side of the If you hold down the " button, the tuning frequency will increase continuously, and if you hold down the " side of the button, the tuning " frequency will decrease continuously. Release the button when your desired frequency is reached. If you press the " " or " " side of the SEEK/SCAN button briefly, the radio will automatically search for a receivable station and stop at the first one it finds. This function may not be available, however, when radio signals are weak. In such a situation, perform manual tuning to select the desired station.