2009 Subaru Outback Owner's Manual - Page 333

9-8 In case of emergency 10. Remove the wheel nuts and the flat tire. wheel nuts. Tighten them by hand. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 13. Turn the jack handle counterclockwise to lower the vehicle. Turn the jackscrew by hand until the jack head engages firmly into the jack-up point. 9. Insert the jack handle into the jackscrew, and turn the handle until the tire clears the ground. Do not raise the vehicle higher than necessary. 11. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 12. Put on the spare tire. Replace the 14. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. The torque for tightening the nuts is 74 to 89 lbf·ft (100 to 120 N·m, 10 to 12 kgf·m). This torque is equivalent to applying