2009 Subaru Outback Owner's Manual - Page 99

Keys and doors 2-7 this function can be changed by a SUBARU dealer. Contact the nearest SUBARU dealer if you would like to change the setting. Power door locking switches NOTE . The factory setting (default setting) for this function is set as "operational". . When leaving the vehicle, please make sure that all doors and the rear gate (Station wagon) are completely closed. . The battery drainage prevention function does not operate while the key is in the ignition switch. Driver's switch All doors and the rear gate (Station wagon) can be locked and unlocked by the power door locking switches located at the driver's side and the front passenger's side doors. To lock all doors (including the rear gate of a Station wagon), push the switch to the front ("LOCK") position. To unlock all doors (including the rear gate of a Station wagon), pull the switch to the rear position. When you close the doors after you set the door locks, the doors remain locked. NOTE Make sure that you do not leave the key inside the vehicle before locking the doors from the outside using the power door locking switches. & Key lock-in prevention function This function prevents the doors from being locked with the key still in the ignition switch. ! Behavior with key lock-in prevention function operational With the driver's door open, the doors are automatically kept unlocked even if the door locking switch is pushed to the front - CONTINUED - Front passenger's switch