2009 Suzuki Grand Vitara Owner's Manual - Page 120
2009 Suzuki Grand Vitara Manual
Page 120 highlights
Tire Pressure Monitoring System (TPMS): Break-In: 6 OPERATING YOUR VEHICLE Transfer Switch Operation Operate the transfer switch according to the appropriate procedure described below: From N to 4H Stop the vehicle completely, place the transmission in "N" (Neutral) and depress the brake pedal and the clutch pedal fully (if equipped), then push in and turn the switch to shift into "4H". From 4H to 4H LOCK You can operate the transfer switch either when the vehicle is stopped or while the vehicle is moving. Position the front wheels straight ahead and turn the switch to shift into "4H LOCK". If the vehicle is moving, we recommend that the speed be less than 100 km/h (60 mph) during this operation. transfer switch. Be sure to wait until traffic conditions allow you to accelerate and decelerate safety before using this procedure. From 4H LOCK to 4L LOCK Stop the vehicle completely, place the transmission in "N" (Neutral) and depress the brake pedal and the clutch pedal fully (if equipped), then push in and turn the switch to shift into "4L LOCK". From 4L LOCK to 4H LOCK Stop the vehicle completely, place the transmission in "N" (Neutral) and depress the brake pedal and the clutch pedal fully (if equipped), then push in and turn the switch to shift into "4H LOCK". From 4H LOCK to 4H You can operate the transfer switch either when the vehicle is stopped or while the vehicle is moving. Position the front wheels straight ahead and turn the switch to shift into "4H". If the vehicle is moving, we recommend that the speed be less than 100 km/h (60 mph) during this operation. 64J209 NOTE: • When shifting between the transfer switch position and the transfer gear position is unmatched, all 4WD indicators will blink. • If it is difficult to shift between "4H" and "4H LOCK" while the vehicle is moving, try accelerating and decelerating your vehicle several times after turning the transfer switch. Be sure to wait until traffic conditions allow you to accelerate and decelerate safety before using this procedure. From 4H to N (1) CAUTION Do not operate the transfer switch while tires are racing. NOTE: • When shifting between the transfer switch position and the transfer gear position is unmatched, all 4WD indicators will blink. • If it is difficult to shift between "4H" and "4H LOCK" while the vehicle is moving, try accelerating and decelerating your vehicle several times after turning the CAUTION Do not operate the transfer switch while tires are racing. Stop the vehicle completely, place the transmission in "N" (Neutral) and depress the brake pedal and the clutch pedal fully (if equipped), then push in and turn the switch to the mark (1) at the left of the "N" position, and hold the switch in this posi- 3-21 79K20-03E