2010 Suzuki Kizashi Owner's Manual - Page 96
2010 Suzuki Kizashi Manual
Page 96 highlights
BEFORE DRIVING comes on briefly so you can check that the light is working. • This light comes on if there is any problem with the intelligent all wheel drive (iAWD) system. The drive mode will then automatically switch to the two-wheel drive (2WD) mode. • The light flashes if the vehicle is in any of the following conditions, and the drive train mode will then automatically switch to the 2WD mode. - Wheels of different diameters are fitted to the vehicle. - Drive train components overheat as a result of spinning of a drive wheel in the mud or snow. • The light should normally come on when you press the engine switch to change the ignition mode to "ON" and continue to light or go out depending on the drive train mode engaged. NOTE: Should the light flash, immediately move the vehicle to a safe place and park it there to protect the drive train components. If you let the engine run at idle for a while, the light will stop flashing and then stay lit, and the i-AWD mode will resume. Electric Power Steering Warning Light Master Warning Indicator Light 78K049 80J408 This light comes on while the engine is running if there is any problem with the electric power steering system. • The light should normally come on when you press the engine switch to change the ignition mode to "ON" and go out as soon as the engine is started. NOTE: • The following conditions may indicate a problem with the electric power steering system. In the event of any of these conditions, have your vehicle inspected by an authorized SUZUKI dealer. - The light comes on while driving. - The light does not come on even when you press the engine switch to change the ignition mode to "ON". - The light stays on after the engine has started. • The electric power steering system stops functioning if it has any problem. Without the system operating, the steering wheel will require more effort to turn than usual. When you press the engine switch to change the ignition mode to "ON", the light comes on briefly so you can check that the light is working. When the information display shows warning and indicator messages, this indicator light may also come on or blink. For details, refer to "Information Display" in this section. 2-77