2008 Volvo C30 Owner's Manual - Page 53

1. Turn signals, lane change position 2. Turn signals, position for normal turns 3. High beam flash 4. Toggle between high and low beams, Home Safe lighting Turn signals When turning Move the lever as far up or down as possible (to position 2) to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand. When changing lanes The driver can automatically flash the turn signals 3 times by: Moving the turn signal lever up or down to position 1 and releasing it. Moving the lever up or down to position 2 and immediately back to its original position. NOTE This automatic flashing sequence can be interrupted by immediately moving the lever in the opposite direction. If the turn signal indicator flashes faster than normal, check for a burned-out turn signal bulb. High/low beam headlights Continuous high beams 1. Turn the ignition key or optional keyless drive start control to position II. 2. With the light switch (1) in position to toggle between high and low beams. High beam flash 1. Turn the ignition key or optional keyless drive start control to position II. 2. Pull the turn signal lever to position 3. The high beams will remain on until the lever is released. Home safe lighting When you leave your vehicle at night, you can make use of the home safe lighting function to illuminate the area in front , (see page 59) pull the turn signal lever toward the steering wheel (position 4)