2010 Volvo XC60 Owner's Manual - Page 239

06 Maintenance and specifications Replacing bulbs NOTE If an error message remains in the display after a faulty bulb has been replaced, contact an authorized Volvo workshop. 3. Remove the burned out bulb by pressing it in and turning it counterclockwise. 4. Insert a new bulb, press it in and turn it clockwise. 5. Reinsert the bulb holder and turn it clockwise. Footwell lighting Brake lights and taillights License plate lighting 1. Insert a screwdriver at the short end of the lens closest to the tunnel console (the center of the vehicle) and turn gently so that the lens comes loose. (Applies to both lights). 2. Turn carefully until the lens comes loose. The brake lights and taillights are replaced from inside the cargo area. 1. Remove the screws with a screwdriver. 3. Replace the bulb. 4. Press the lens back into place. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and screw it into place. 06 NOTE Before starting to replace a bulb, see page 234. 1. Open the panel. 2. Remove the bulb holder by turning it counterclockwise. `` 239