2006 Yamaha Motorsports Attak Owners Manual - Page 24
2006 Yamaha Motorsports Attak Manual
Page 24 highlights
Clock To set the clock 1. Push the "SELECT" button 1 and "RESET" button 2 simultaneously until the hour digits start flashing. 2. Push the "RESET" button to change the hour setting, and then push the "SELECT" button. The minute digits will start flashing. 3. Push the "RESET" button to change the minute setting, and then push the "SELECT" button. The clock starts when the "SELECT" button is released. NOTE: @ The clock must be set again when the battery is disconnected. @ Display brightness control This function allows you to adjust the brightness of the meter display to suit the outdoor lighting conditions. To adjust the display brightness 1. Turn the main switch to "OFF". 2. Push and hold down the "SELECT" button 1. 3. Turn the main switch to "ON", and then, after 5 seconds, release the "SELECT" button. 4. Push the "RESET" button 2 to select the desired display brightness level 3, and then push the "SELECT" button. The normal display returns when the "SELECT" button is released. NOTE: @ If the main switch is turned to "OFF" or the engine is started before completing the procedure, the setting is not applied. @ ESU00363 High beam indicator light The high beam indicator light 1 comes on when the high beams of the headlights are switched on. (See page 5-11 for headlight beam switch operation.) 5-5