2008 Yamaha Motorsports Apex M-TX Owners Manual - Page 23
2008 Yamaha Motorsports Apex M-TX Manual
Page 23 highlights
Control functions If any of those circuits are defective, the warning light and the self-diagnosis warning indicator will flash, and a two-digit error code will flash slowly in the tripmeter/odometer display. 1. Engine stop switch"j^j" During the first few rides, practice using the stop switch so that you can react quickly in an emergency. 1. Warning light "/jj\" 2. Self-diagnosis warning indicator "CSi" 3. Two-digit error code EWS00650 ESU10661 Headlight beam switch "LIGHTS" Push the headlight beam switch to change the headlight to high beam "HI" or to low beam "LO". If the self-diagnosis warning indicator and warning light flash continuously, and an error code is displayed during operation, there may be some problem with an electrical circuit, couplers, etc. Note the error code, and then have a Yamaha dealer inspect the snowmobile as soon as possible in order to avoid engine damage. ESU10530 Engine stop switch "^" The engine stop switch is used to stop the engine in an emergency. Simply push the stop switch to stop the engine. To start the engine, pull the stop switch and proceed with starting the engine. (See pages 33 for engine starting procedures.) 1 . Headlight beam switch "LIGHTS" 2. High beam "HI" 3. Low beam "LO" ESU12650 Grip/thumb warmer adjustment switch The grip warmer adjustment switch and the thumb warmer adjustment switch control the electrically heated handlebar grips and throttle lever respectively. 17