2008 Yamaha Motorsports Apex M-TX Owners Manual - Page 33
2008 Yamaha Motorsports Apex M-TX Manual
Page 33 highlights
Control functions RX10RTR / RX10MT / RX10MTA NOTE: The rear suspension spring preload can be further adjusted by changing the position of the spring seat. Have a Yamaha dealer make this adjustment as it requires special tools. ESU11001 Adjusting the rear suspension damping force (RX1 0R / RX10RTR / RX10LT) RX10R / RX10LT 1. Spring preload adjuster EWS00160 Spring preload setting at the rear shock absorber (spring preload adjuster position): Minimum (soft): S Standard: M Maximum (hard): H RX10R / RX10LT Do not turn the remote adjustment dial while the snowmobile is moving as this could cause loss of control, an accident, and injury. ECS00290 CAUTION: Be sure to stop the remote adjustment dial at a marked position around the dial where there is a click. The rebound damping force can be adjusted by turning the rear suspension damping force remote adjustment dial. To increase the rebound damping force, turn the adjustment dial in direction (a). To decrease the rebound damping force, turn the adjustment dial in direction (b). 1. Spring preload adjusting ring Spring preload setting (spring seat length or spring preload adjusting ring position): Minimum (soft): RX10R / RX10LT 1 Standard: RX10R / RX10LT 4 Maximum (hard): RX10R / RX10LT 7 * The spring seat length changes approximately 1.5 mm (0.06 in) with each full turn of the adjusting ring. 1 . Rear suspension damping force remote adjustment dial 2. Standard position 27