2009 Yamaha Motorsports RS Viking Professional Owners Manual - Page 26
2009 Yamaha Motorsports RS Viking Professional Manual
Page 26 highlights
Control functions 3. Install the passenger seat bolts, and then tighten them to the specified torque. NOTICE: When using the rear storage area, do not load any cargo that is too large for it. In addition, cargo must not project from the edges of the rear storage area. [ECS00211] Passenger seat bolt tightening torque: 47.5 Nm (4.75 m·kgf, 34 ft·lbf) To install the passenger seat and backrest 1. Open the rider seat. (See "Storage compartment" for details.) 2. Remove the passenger seat bolts, insert the hooks on the bottom of the passenger seat and backrest into the slots in the rear storage area, and then slide the seat and backrest forward. NOTICE: Make sure that the wire harness is not pinched when installing the passenger seat and backrest. [ECS00231] 3. Install the passenger seat bolts, and then tighten them to the specified torque. ESU10851 Tow hitch Use the tow hitch within the specified weight limits. 1. Tow hitch Tow weight limit: 120 kg (265 lb) Vertical weight limit: 15 kg (33 lb) ECS00241 NOTICE To prevent premature wear of the V-belt, avoid traveling under 10 km/h (6 mi/h) when towing for long distances or long periods of time. ESU10601 Fuel Make sure there is sufficient gasoline in the tank. EWS00071 WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. 1. Before refueling, turn off the engine and be sure that nobody is on the snowmobile. Never refuel while smoking, or while in the vicinity of sparks, open flames, or 20