2009 Yamaha Motorsports RS Viking Professional Owners Manual - Page 30

2009 Yamaha Motorsports RS Viking Professional Manual

Get 2009 Yamaha Motorsports RS Viking Professional PDF manuals and user guides View all 2009 Yamaha Motorsports RS Viking Professional manuals

Page 30 highlights

Control functions ESU13112 Adjusting the spring preload of the sliding frame extension EWS00750 WARNING The left and right spring preloads must be adjusted to the same setting. Uneven settings can cause poor handling and loss of stability. 1. Nut 2. Full rate adjusting bolt The spring preload of the sliding frame extension can be adjusted by turning the adjusting nuts. 1 2 (a) (b) 1. Full rate adjusting bolt Spring rate and damping force setting (full rate adjusting bolt installation position): Minimum (soft): S Standard: S Maximum (hard): H 3. While holding the adjusting bolt securely, tighten the nut. Nut tightening torque: 49 Nm (4.9 m·kgf, 35 ft·lbf) 1. Spring preload adjusting nut 2. Distance A To increase the spring preload, turn the adjusting nut in direction (a). To decrease the spring preload, turn the adjusting nut in direction (b). TIP The spring preload setting is determined by measuring distance A, shown in the illustration. The longer distance A is, the higher the spring preload; the shorter distance A is, the lower the spring preload. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Control functions
24
3.
While holding the adjusting bolt securely,
tighten the nut.
ESU13112
Adjusting the spring preload of the
sliding frame extension
WARNING
EWS00750
The left and right spring preloads must be
adjusted to the same setting. Uneven set-
tings can cause poor handling and loss of
stability.
The spring preload of the sliding frame exten-
sion can be adjusted by turning the adjusting
nuts.
To increase the spring preload, turn the ad-
justing nut in direction (a). To decrease the
spring preload, turn the adjusting nut in direc-
tion (b).
TIP
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The longer distance A is, the higher the
spring preload; the shorter distance A is, the
lower the spring preload.
1. Nut
2.
Full rate adjusting bolt
1.
Full rate adjusting bolt
Spring rate and damping force setting
(full rate adjusting bolt installation posi-
tion):
Minimum (soft):
S
Standard:
S
Maximum (hard):
H
Nut tightening torque:
49 Nm (4.9 m·kgf, 35 ft·lbf)
1.
Spring preload adjusting nut
2.
Distance A
(a)
(b)
2
1