2011 Yamaha Motorsports FX Nytro M-TX SE 162 Owners Manual - Page 16
2011 Yamaha Motorsports FX Nytro M-TX SE 162 Manual
Page 16 highlights
Control functions TIP If the T.O.R.S. is activated, the warning light and engine trouble warning indicator will flash, and the two-digit code "84" will flash in the meter display. If this occurs, have a Yamaha dealer check the system as soon as possible. When the key is turned to the on position, the warning light, the low coolant temperature indicator light, and all segments of the meter display come on and go off. The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter. 1 7 2 6 543 1. Warning light " " 2. Engine trouble warning indicator " 3. Two-digit code "84" ESU12725 " Multi-function meter unit The multi-function meter unit is equipped with the following: G a digital speedometer G an odometer G a tripmeter (which shows the distance traveled since it was last set to zero) G an engine speed meter (which shows the engine speed; not for use while riding) G warning indicators (which show engine trouble, coolant temperature, fuel level, and oil level warnings) G indicator lights (which show high beam and low coolant temperature conditions) G a warning light (which shows warnings together with the warning indicators) G a fuel meter (which shows the fuel remaining in the fuel tank) G a grip/thumb warmer level indicator (which shows the grip warmer or the thumb warmer level) Meter display Warning indicators High beam indicator light " " Low coolant temperature indicator light " " 5. Warning light " " 6. "RESET" button 7. "SELECT" button 1. 2. 3. 4. Odometer, tripmeter, and engine speed meter modes 1 1. Odometer/tripmeter/engine speed meter Pushing the "SELECT" button switches the display between the odometer mode "ODO", tripmeter mode "TRIP", and engine speed meter mode "r/min" in the following order: ODO → TRIP → r/min → ODO 10