2011 Yamaha Motorsports FX Nytro M-TX SE 162 Owners Manual - Page 56
2011 Yamaha Motorsports FX Nytro M-TX SE 162 Manual
Page 56 highlights
Periodic maintenance and adjustment ESU13002 ESU12783 Tool kit The owner's tool kit is located in the storage pouch. (See page 18 for more information about the storage pouch.) The service information included in this manual and the tools provided in the owner's tool kit are intended to assist you in the performance of preventive maintenance and minor repairs. However, additional tools such as a torque wrench may be necessary to perform certain maintenance work correctly. Removing and installing the shroud and covers EWS00091 WARNING Be sure shroud and covers are secured before operation. A loose shroud or cover could move and cause loss of control. Shroud To remove the shroud Loosen the fasteners, and then slide the shroud forward. 1 1. Tool kit ECS00780 1. Fastener NOTICE Before starting the engine, make sure that the tool kit is securely fastened and that the storage pouch zipper is completely closed. 1 TIP If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. 1. Shroud To install the shroud Hook the end of the shroud onto the front cover, insert the projections on the shroud into the slots in the headlight unit stay, and then tighten the fasteners. 50