2011 Yamaha Motorsports Phazer GT Owners Manual - Page 37
2011 Yamaha Motorsports Phazer GT Manual
Page 37 highlights
Control functions ESU13720 Adjusting the damping forces of the center and rear shock absorbers (FX10RTRS), or damping force of the rear shock absorber (FX10/FX10XT) ECS00881 NOTICE G G Do not continue to turn the adjuster in direction (a) after it stops. The shock absorber could be damaged and damping force adjustments will not be able to be made. Do not turn the adjuster in direction (b) beyond the adjustable range. Even if the adjuster is continually turned beyond the adjustable range, there will be no change in the damping force. Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting screw fully turned in direction (a) To increase the rebound damping force, turn the adjusting dial in direction (a). To decrease the rebound damping force, turn the adjusting dial in direction (b). FX10RTRS The compression and rebound damping forces can be adjusted by turning the adjusting bolt, dial, knob, or screw. Center shock absorber To increase the compression damping force, turn the adjusting screw in direction (a). To decrease the compression damping force, turn the adjusting screw in direction (b). 1. Rebound damping force adjusting dial (b) 1 (a) Rebound damping force setting: Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 3 click(s) in direction (b)* * With the adjusting dial fully turned in direction (a) 1. Compression damping force adjusting knob 31