2011 Yamaha Motorsports RS Vector LTX GT Owners Manual - Page 41
2011 Yamaha Motorsports RS Vector LTX GT Manual
Page 41 highlights
Control functions 3. Align the holes in the backrest bracket with the bolts on the carrier lock bracket, and then place the backrest on the carrier lock bracket. 1. Carrier lock lever ESU10862 Tow hitch bracket (RST90 / RST90GT) 1. Hole ECS00241 NOTICE To prevent premature wear of the V-belt, avoid traveling under 10 km/h (6 mi/h) when towing for long distances or long periods of time. This snowmobile is equipped with a tow hitch bracket that is used to install a tow hitch. Use the tow hitch bracket within the specified weight limits. 1. Bolt 4. 5. 6. Align the holes in the rear carrier with the bolts on the carrier lock bracket, and then place the rear carrier on the carrier lock bracket. Slide both the backrest and the rear carrier backward until they stop. Pull the carrier lock lever up to lock the backrest and the rear carrier in place. Then, place the lever under the rear carrier and secure it with the holder. 1 1. Tow hitch bracket TIP A tow hitch is not included with the snowmobile and must be purchased separately. 35