2011 Yamaha Motorsports RS Vector LTX GT Owners Manual - Page 69
2011 Yamaha Motorsports RS Vector LTX GT Manual
Page 69 highlights
Periodic maintenance and adjustment ECS00940 NOTICE G G Be sure to slide the covers onto the short end of each hexagon wrench before placing the wrenches in the tool kit. Securely tie the strap around the tool kit. 1 2 2 3 1 4 3 1. Fastener 2. Shroud 3. Shroud stay 1. 2. 3. 4. Hexagon wrench cover Hexagon wrench Tool kit Strap To install the shroud Hook the end of the shroud onto the shroud stay, slowly lower it to the original position, and then tighten the fasteners. ESU14142 Removing and installing the shroud and covers (RS90GT / RS90LTGT / RST90GT) EWS00091 WARNING Be sure shroud and covers are secured before operation. A loose shroud or cover could move and cause loss of control. 1. Shroud stay Left and right side covers To remove a side cover 1. Remove the shroud. (See the above procedure.) 2. Loosen the fasteners, pull outward on the areas shown, and then slide the side cover forward to remove it. Shroud To remove the shroud Loosen the fasteners, slowly raise the shroud, and then unhook the shroud from the shroud stay. 63