2011 Yamaha Motorsports RS Vector LTX GT Owners Manual - Page 81
2011 Yamaha Motorsports RS Vector LTX GT Manual
Page 81 highlights
Periodic maintenance and adjustment 3. Remove the air filter case cover by unhooking the case fastener and the case cover fasteners. 5. 6. Place the air filter element frame in the original position. Install the air filter case cover and attach the air filter case by hooking all the fasteners. Close the shroud. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the top cover. (See page 63 for removal procedures.) Remove the headlight unit bolt and the windshield stay bolts on each side of the snowmobile. 2 1 7. 1. 2. 3. 1. Air filter case fastener 2. Air filter case cover fastener RST90GT 4. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element, brush off the snow, and then install the air filter element. 2 1 1 1. Headlight unit bolt 2. Windshield stay bolt 4. 1. Air filter element frame Unhook the headlight unit as shown, then lift it up and move it rearward, away from the air filter case cover. NOTICE: Be careful not to scratch the snowmobile when moving the headlight unit. [ECS00920] 75