2012 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 109
2012 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 109 highlights
G Make sure that no foreign material enters the crankcase. 12. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 13. Turn the engine off, wait at least ten minutes, and then check the oil level and correct it if necessary. 14. Install the access cover by turning it clockwise. EBU27306 2. Remove the final gear oil level check bolt and its gasket, and then check the oil level in the final gear case. The oil level should be at the brim of the check hole. 1 2 3 4 Final gear oil The final gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the ATV. In addition, the final gear oil level must be checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the final gear oil level 1. Place the ATV on a level surface. 1. 2. 3. 4. Final gear oil Gasket Final gear oil level check bolt Correct oil level 8 3. If the oil is below the brim of the check hole, remove the final gear oil filler bolt and its gasket, and then add sufficient oil of the recommended type to raise it to the correct level. 8-27