2012 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 42
2012 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 42 highlights
EWB02730 EBU19183 4 WARNING The rear shock absorber assembly contains highly pressurized nitrogen gas. If the shock absorber assembly is damaged, it could explode causing injury or property damage. Shock absorber cylinder damage could also result in poor handling which could cause an accident. G Do not tamper with or attempt to open the cylinder assembly. G Do not subject the shock absorber assembly to an open flame or other high heat. G Do not deform or damage the cylinder in any way. G Do not dispose of a damaged or worn out shock absorber assembly yourself. Take the shock absorber assembly to a Yamaha dealer for any service. Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc. The auxiliary DC jack should only be used when the engine is running and the light switch is set to "OFF". 1. Set the light switch to "OFF". 2. Turn the accessory off. 3. Start the engine. (See page 6-1.) 4. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. 1. Auxiliary DC jack cap 4-23