2012 Yamaha Motorsports Grizzly 700 4x4 Owners Manual - Page 24
2012 Yamaha Motorsports Grizzly 700 4x4 Manual
Page 24 highlights
G G G an hour meter (which shows the total time the engine has been running) a fuel meter a self-diagnosis device 4 Odometer and tripmeter modes Pushing the "SELECT" button switches the display between the odometer mode "ODO" and the tripmeter modes "TRIP A" and "TRIP B" in the following order: ODO → TRIP A → TRIP B → ODO To reset a tripmeter, select it by pushing the "SELECT" button, and then push the "RESET" button for at least three seconds. The tripmeters can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. TIP Pushing and holding in the "SELECT" button, and turning the key to " " (on) while the button is pushed, switches the display between "mph" and "km/h". Clock mode Pushing the "CLOCK" button switches the display between the clock mode "CLOCK" and the hour meter mode "HOUR" in the following order: CLOCK → HOUR → CLOCK To set the clock 1. Set the display to the clock mode. 2. Push the "SELECT" button and "RESET" button together for at least three seconds. 3. When the hour digits start flashing, push the "RESET" button to set the hours. 4. Push the "SELECT" button, and the minute digits will start flashing. 5. Push the "RESET" button to set the minutes. 6. Push the "SELECT" button and then release it to start the clock. Fuel meter The fuel meter indicates the amount of fuel in the fuel tank. The display segments of the fuel meter disappear from "F" (full) towards "E" (empty) as the fuel level decreases. When the "E" segment disappears and the fuel level warning indicator flashes, refuel as soon as possible. 4-5