2012 Yamaha Motorsports Phazer GT Owners Manual - Page 26
2012 Yamaha Motorsports Phazer GT Manual
Page 26 highlights
Control functions 1. Brake lever ESU14211 TIP When the brake lever is squeezed, the brake light comes on. ECS00060 Drive guard EWS00402 WARNING G NOTICE Make sure that the brake lever end does not project out over the handlebar end. This will help prevent brake lever damage when the snowmobile is placed on its side for service. ESU10581 G Parking brake lever When parking the snowmobile or starting the engine, apply the parking brake by moving the parking brake lever to the left. G Coming in contact with the rotating Vbelt or clutch parts can cause severe injury or death. Never run the engine with the drive guard removed. Make sure that the drive guard is installed securely before operating the snowmobile to protect against severe injury or death from a broken V-belt or other part should it come off the snowmobile while it is in operation. ECS00930 NOTICE Never run the engine with the V-belt removed. Clutch components can be damaged. Be careful not to scratch the windshield when removing or installing the drive guard. G 1. Parking brake lever The drive guard is designed to protect the Vbelt clutch and V-belt in case parts break or come loose. The drive guard is located behind the left side cover. (See page 49 for removal procedures.) To release the parking brake, move the parking brake lever to the right. To remove the drive guard 1. Pull out the drive guard locking pin from the drive guard upper holder. 20