2012 Yamaha Motorsports Phazer GT Owners Manual - Page 85
2012 Yamaha Motorsports Phazer GT Manual
Page 85 highlights
Troubleshooting G When connecting the jumper cables, do not contact the jumper cables to each other or to the frame or any metal part of the snowmobile. This can cause electrical system damage or A FIRE HAZARD. Apply the parking brake and turn the key to the off position. Remove the right side cover. (See page 49 for removal procedures.) Connect the red (+) jumper cable to the positive (+) terminal of the discharged battery. Connect the other end of the red (+) jumper cable to the positive (+) terminal of the booster battery. Connect the black (-) jumper cable to the negative (-) terminal of the booster battery. Connect the other end of the black (-) jumper cable to the negative (-) terminal of the discharged battery. NOTICE: Do not reverse the connections! Make sure that all connections are secure and correct before attempting to start the engine. Any wrong connection could damage the electrical system. [ECS00671] 1. 2. 3. 4. 5. 6. 7. 8. Start the engine. Disconnect the black (-) jumper cable from the negative (-) terminal of the discharged battery. 9. Disconnect the black (-) jumper cable from the negative (-) terminal of the battery used to jump-start the engine. 10. Disconnect the red (+) jumper cable from the positive (+) terminal of the battery used to jump-start the engine. 11. Disconnect the red (+) jumper cable from the positive (+) terminal of the discharged battery. 12. Install the right side cover. Electric starter does not operate or operates slowly G G G Engine stop switch is pushed in: Pull it out. Faulty wire connections: Check connections or ask a Yamaha dealer to check. Discharged battery: Charge battery or see "Discharged battery" above. 79