2012 Yamaha Motorsports Phazer GT Owners Manual - Page 56
2012 Yamaha Motorsports Phazer GT Manual
Page 56 highlights
Periodic maintenance and adjustment 2. Loosen the fasteners, lift up the air filter case cover slightly, and then unhook the cover from the air filter case to remove it. 2 1 1. Holder on the front cover 2. Projection on the air filter case cover 1. Air filter case cover 2. Fastener Shroud and air filter case cover (PZ50VT) To open the shroud and remove the air filter case cover 1. Unhook the shroud latches, and then slowly raise the shroud forward until it stops. To install the front cover and air filter case cover 1. Insert the projections on the end of the air filter case cover into the slots in the air filter case, place it in the original position, and then tighten the fasteners. 1. Shroud latch 2. Shroud 1. Projection on the end of the air filter case cover 2. Slot in the air filter case 2. Loosen the fasteners, lift up the air filter case cover slightly, and then unhook the cover from the air filter case to remove it. 2. Fit the holders on the front cover over the projections on the air filter case cover, slide the front cover downward, and then hook the latch onto the holder on the front of the snowmobile. 50