2012 Yamaha Motorsports Stryker Owners Manual - Page 23
2012 Yamaha Motorsports Stryker Manual
Page 23 highlights
U27D11E0.book Page 6 Monday, July 11, 2011 11:15 AM INSTRUMENT AND CONTROL FUNCTIONS The fuel level warning light comes on and the display switches to the fuel reserve tripmeter mode "Trip F" when the fuel level is very low. Refuel as soon as possible to avoid running out of fuel. To set the clock Brightness control mode 5. Push the "SELECT" switch to set the minutes. 6. Push the "RESET" switch and then release it to start the clock. Self-diagnosis device ECA11590 NOTICE If the display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. 4 1 1 1. Clock 1. Error code display 1 1. Brightness level 1. Push the "SELECT" switch to change the display to the clock mode. 2. Push the "SELECT" and "RESET" switches together for at least three seconds. 3. When the hour digits start flashing, push the "SELECT" switch to set the hours. 4. Push the "RESET" switch, and the minute digits will start flashing. This model is equipped with a self-diagnosis device for various electrical circuits. If a problem is detected in any of those circuits, the engine trouble warning light will come on and the display will indicate an error code. If the display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. This function allows you to adjust the brightness of the multi-function meter unit panel to suit the outside lighting conditions. To set the brightness 1. Turn the key to "OFF". 2. Push and hold the "SELECT" switch. 4-6