2012 Yamaha Motorsports Stryker Owners Manual - Page 38
2012 Yamaha Motorsports Stryker Manual
Page 38 highlights
U27D11E0.book Page 1 Monday, July 11, 2011 11:15 AM OPERATION AND IMPORTANT RIDING POINTS EAU15951 EAU48710 EAU46125 Starting the engine Read the Owner's Manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your Yamaha dealer. EWA10271 WARNING Failure to familiarize yourself with the controls can lead to loss of control, which could cause an accident or injury. 6 TIP This model is equipped with: G a lean angle sensor to stop the engine in case of a turnover. In this case, the multi-function display indicates error code 30, but this is not a malfunction. Turn the key to "OFF" and then to "ON" to clear the error code. Failing to do so will prevent the engine from starting even though the engine will crank when pushing the start switch. G an engine auto-stop system. The engine stops automatically if left idling for 20 minutes. If the engine stops, simply push the start switch to restart the engine. In order for the ignition circuit cut-off system to enable starting, one of the following conditions must be met: G The transmission is in the neutral position. G The transmission is in gear with the clutch lever pulled and the sidestand up. See page 4-16 for more information. 1. Turn the key to "ON" and make sure that the engine stop switch is set to " ". The following warning lights should come on for a few seconds, then go off. G Oil level warning light G Fuel level warning light G Coolant temperature warning light G Engine trouble warning light 6-1