3Com 2924-SFP User Guide - Page 140
Removing SNMP Traps, Recipients IP, Address, Community String, Trap Version, Apply
UPC - 662705518909
View all 3Com 2924-SFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
140 CHAPTER 12: CONFIGURING SNMP The SNMP Traps Setup Page contains the following fields: ■ Recipients IP Address - Defines the IP address to which the traps are sent. ■ Community String - Defines the community string of the trap manager. ■ Trap Version - Defines the trap type. The possible field values are: ■ SNMP V1 - Indicates that SNMP Version 1 traps are sent. ■ SNMP V2c - Indicates that SNMP Version 2 traps are sent. 2 Define the relevant fields. 3 Click Apply. The SNMP Traps are defined, and the device is updated. Removing SNMP Traps The SNMP Traps Remove Page allows the network manager to remove SNMP Traps. Monitor users have no access to this page. To remove SNMP traps: 1 Click Administration > SNMP > Traps > Remove. The SNMP Traps Remove Page opens: Figure 75 SNMP Traps Remove Page