3Com 3C16980 User Guide - Page 25
Placing Units On Top of Each Other, If you are placing Switch units one on top of the other
UPC - 662705149554
View all 3Com 3C16980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Placing Units On Top of Each Other 25 Figure 7 Fitting a bracket for rack mounting 3 Insert the three screws and tighten with a suitable screwdriver. You must use the screws supplied with the mounting brackets. Damage caused to the unit by using incorrect screws invalidates your warranty. 4 Repeat steps 2 and 3 for the other side of the Switch. 5 Insert the Switch into the 19-inch rack and secure with suitable screws (not provided). Ensure that ventilation holes are not obstructed. 6 Connect network cabling. Placing Units On Top of Each Other If the Switch units are free-standing, up to four units can be placed one on top of the other. If you are mixing a variety of SuperStack II Switch and Hub units, the smaller units must be positioned at the top. If you are placing Switch units one on top of the other, you must use the self-adhesive rubber pads supplied. Apply the pads to the underside of each Switch, sticking one in the marked area at each corner. Place the Switch units on top of each other, ensuring that the pads of the upper unit line up with the recesses of the lower unit.