3Com 3C16980 User Guide - Page 27
Stacking Up To Four Units, Placing Units On Top of Each, Other,
UPC - 662705149554
View all 3Com 3C16980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Figure 8 A stack of two units Stacking Units 27 Stacking Up To Four You can stack up to four Switch units with a single SuperStack II Switch Units Matrix Module and the appropriate number of Matrix Cables. You only need one Matrix Module for each stack. To stack up to four Switch units: 1 Power-off all the units. 2 Arrange the units as required. They can be rack-mounted or free-standing; if you choose to have them free-standing, remember to position the rubber feet as detailed in "Placing Units On Top of Each Other" on page 25. When positioning the units, note that Matrix Cables are 1m (3.28ft) long. 3 Install the Matrix Module into one of the units. You can find instructions for doing this in the documentation that accompanies the Matrix Module. We recommend that for ease of configuration, the Matrix Module should be installed in the bottom Switch of your stack. 4 Connect the Matrix Cables, as shown in Figure 9: a Connect a Matrix Cable to the port marked Unit 1 on the Matrix Module. Connect the other end of this cable to the matrix port of the Switch that contains the Matrix Module. b Connect a second Matrix Cable to the port marked Unit 2 on the Matrix Module. Connect the other end of this cable to the matrix port of the second Switch. c Repeat steps a and b for any additional units.