3Com 3CRDSF9PWR-US User Guide - Page 100
Configuring Broadcast Storm Control, Broadcast Storm Modify
UPC - 662705535388
View all 3Com 3CRDSF9PWR-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
100 CHAPTER 4: MANAGING DEVICE SECURITY Configuring Broadcast Storm Control The Broadcast Storm Modify Page configures the storm control settings for all ports. Monitor users have no access to this page. To configure Broadcast Storm Control: 1 Click Device > Broadcast Storm > Modify. The Broadcast Storm Modify Page opens: Figure 52 Broadcast Storm Modify Page The Broadcast Storm Modify Page contains the following fields: ■ Broadcast Mode - Defines the storm control mode to use on the selected interface. ■ Disabled - Disables storm control on the selected port. ■ Broadcast - Enables broadcast storm control on the selected port. ■ Broadcast&Multicast - Enables broadcast and multicast storm control on the selected port. ■ Packet Rate Threshold - Defines the maximum rate (kilobits per second) at which broadcast or multicast packets are forwarded. The range is 64-100,000 for Fast Ethernet ports, and 64-1,000,000 for Gigabit Ethernet ports. The default value is 10000. Also note that the resolution at which this parameter can be configured is 64 kilobits. 2 Define the relevant fields.