3Com 3CRDSF9PWR-US User Guide - Page 180
Defining Bandwidth Settings, Enables setting an Ingress Rate Limit.
UPC - 662705535388
View all 3Com 3CRDSF9PWR-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
180 CHAPTER 13: CONFIGURING QUALITY OF SERVICE Defining Bandwidth The Bandwidth Setup Page allows network managers to define the Settings bandwidth settings for a specified interface. Interface shaping can be also be applied to the egress traffic on a specified interface. Monitor users have no access to this page. To configure Bandwidth Settings: 1 Click Device > QoS > Bandwidth > Setup. The Bandwidth Setup Page opens: Figure 96 Bandwidth Setup Page The Bandwidth Setup Page contains the following fields: Ingress Rate Limit ■ Enable Ingress Rate Limit - Enables setting an Ingress Rate Limit. ■ Ingress Rate Limit - Defines the ingress traffic limit for the port. The field options include 128, 1024, 5056, 10048, 50048, 100032 and 500032 kbits per second. When using the command line interface, the field range is 64-100,000 kbits per second for Fast Ethernet ports, and 64-1,000,000 kbits per second for Gigabit Ethernet ports at a resolution of 64 kbits per seconds.