3Com 3CRGPOE10075-US User Guide - Page 32
If the Access Point Is on a Different Subnet, the Access Point. - default password
UPC - 662705488912
View all 3Com 3CRGPOE10075-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
24 CHAPTER 2: INSTALLING AND CONNECTING THE ACCESS POINT Figure 10 3Com Access Point Manager 4 Click the access point name that corresponds to the name on the base of the Access Point. 5 Click Web Management to start the Web interface. If the Web Management button is unavailable, it means that the Access Point and the admin computer are on different subnets. Change the subnet mask for the Access Point so you can connect to the Web interface. For more information, refer to "If the Access Point Is on a Different Subnet". The interface loads in your Web browser and an authentication dialog box appears. 6 In User name, type admin, and in Password, type password. User name and password are case-sensitive. 7 Click OK. If the Access Point Is on a Different Subnet The default subnet for the Access Point is 255.255.255.0. If your local network is using a different subnet, the Set IP Address button will be active. You need to change the subnet mask for the Access Point so you can connect to the Web interface.