3M MP7640I User Manual
3M MP7640I Manual
 |
View all 3M MP7640I manuals
Add to My Manuals
Save this manual to your list of manuals |
3M MP7640I manual content summary:
- 3M MP7640I | User Manual - Page 1
MP7640i/MP7740i Multimedia Projector Operator's Guide - 3M MP7640I | User Manual - Page 2
MP7640i/MP7740i Multimedia Projector Operator's Guide Thank you for purchasing this projector. WARNING • Please read the accompanying manual "Product Safety Guide" and this "Operator's Guide" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a - 3M MP7640I | User Manual - Page 3
using a UHB (ultra high brightness) lamp and a highly efficient optical system GKeystone MP7640i/MP7740i Multimedia Projector Product Safety Guide MP8765 Projecteur multimedia - Guide de Securite de Produit MP8765 Multimedia-Projektor - Sicherheitsanleitung des Gerats MP8765 Proyector de Multimedia - 3M MP7640I | User Manual - Page 4
adhere to the following safety guidelines to insure safe operation of the projector: • Only plug the power cord into outlets rated for use with or other devices you will be using to the projector. ʙ 2 Insert the batteries into the remote control 3 Connect the power cord (1) Connect - 3M MP7640I | User Manual - Page 5
Foot Adjuster button Air filter Speaker Rear Foot Adjuster 4 THE PROJECTOR Indicates the corresponding reference page Zoom ring Focus ring Remote sensor Lens Slide Lens Door Foot Adjuster LAMP indicator TEMP indicator POWER indicator MENU button Ventilation Openings - 3M MP7640I | User Manual - Page 6
CB/PB port CR/PR port S-VIDEO port RGB port Technical CONTROL port AUDIO port AUDIO R port L port VIDEO port THE REMOTE CONTROL RGB button VIDEO button ASPECT button MAGNIFY buttons FREEZE button VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF - 3M MP7640I | User Manual - Page 7
SETTING UP THE PROJECTOR CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual "Product Safety Guide" and this manual. • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your - 3M MP7640I | User Manual - Page 8
the screen size and projection distance. The values shown in the table are calculated for a full size screen (MP7640i: 800x600 pixels / MP7740i: 1024x768 pixels). a:Distance from the projector to the screen (±10%) b:Distance from the lens center to the bottom of the screen (±10%) The screen - 3M MP7640I | User Manual - Page 9
fire or electrical shock. Please read this manual and the separate "Product Safety Guide". ATTENTION Precautions to observe when connecting other devices to the projector • Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected - 3M MP7640I | User Manual - Page 10
communication S-video input Video input Component video input Audio input (from video equipment) Projector Port RGB IN AUDIO IN CONTROL S-VIDEO IN VIDEO IN COMPONENT VIDEO Y COMPONENT VIDEO (i.e. display devices). • Please use the standard drivers as this projector is a Plug-and-Play monitor. 9 - 3M MP7640I | User Manual - Page 11
attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer - 3M MP7640I | User Manual - Page 12
Connecting to a DVD Player AUDIO/VIDEO IN AUDIO/VIDEO OUT AUDIO/VIDEO cable COMPONENT VIDEO IN COMPONENT VIDEO OUT """ $ ### " # $ S-VIDEO IN S-VIDEO cable If using a S-video connection COMPONENT cable S-VIDEO OUT *GVTJOHBDPNQPOFOU *GVTJOHBOBVEJPWJEFP WJEFPDPOOFDUJPO - 3M MP7640I | User Manual - Page 13
arrow. 2 Insert the batteries Align and insert the two AA batteries (that came with the projector) according to their plus and minus terminals (as indicated in the remote control). 3 Close the battery cover Replace the battery cover in the direction of the arrow and snap it back into place - 3M MP7640I | User Manual - Page 14
for an extended period. • Replace the batteries whenever the remote control starts to malfunction. • When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to - 3M MP7640I | User Manual - Page 15
on/off in right order. • Power on the projector before the computer or video tape recorder. • Power off the projector after the computer or video tape recorder. 14 3 Press the STANDBY/ON button (control panel or remote control) • The projector begins warming up and the POWER indicator blinks - 3M MP7640I | User Manual - Page 16
Selecting an Input Signal 5 Using the remote control If selecting RGB input Press the RGB button Press this button to swich to the devices connected to RGB IN as illustrated below. RGB VIDEO IN S-VIDEO IN RGB IN COMPONENT VIDEO Using the projector's control panel Press the INPUT button As - 3M MP7640I | User Manual - Page 17
on the screen for approximately 5 seconds. STANDBY/ON 2 Press the STANDBY/ON button again (control panel or remote control) Press the STANDBY/ON button again while the "Power off?" message is visible. The projector lamp goes off and starts cooling down. The POWER indicator blinks orange while the - 3M MP7640I | User Manual - Page 18
ADJUSTING THE VOLUME VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE POSITION MENU ESC ENTER RESET 1 Press the VOLUME button As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the volume. VOLUME VOLUME 16 2 - 3M MP7640I | User Manual - Page 19
ADJUSTING THE POSITION VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE POSITION MENU ESC ENTER RESET 1 Press the POSITION button As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the position. POSITION - 3M MP7640I | User Manual - Page 20
USING THE AUTOMATIC ADJUSTMENT FEATURE VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE POSITION MENU ESC ENTER RESET 1 Press the AUTO button AUTO Automatic Adjustment for RGB Input Horizontal position (H. POSIT), vertical position (V. POSIT), clock - 3M MP7640I | User Manual - Page 21
CORRECTING KEYSTONE DISTORTIONS VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE 1 Press the KEYSTONE button As illustrated on the right, a dialog will appear on the screen to aid you in correcting the distortion. KEYSTONE KEYSTONE 16 POSITION - 3M MP7640I | User Manual - Page 22
, VOLUME, MUTE, AUTO, BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state. • If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave - 3M MP7640I | User Manual - Page 23
searching for input signals. If it detects an input signal, the search will cease and the projector will project the detected signal. If the projector is unable to find an input signal at any of its ports, it will return to the state it was in prior to the search. - 3M MP7640I | User Manual - Page 24
OFF FREEZE VOLUME MUTE KEYSTONE POSITION MENU ESC ENTER RESET 1 Press the MENU button MENU The menu display appears on the screen. The projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, SCREEN, and OPTION. Select a menu using the / buttons. The current settings of the - 3M MP7640I | User Manual - Page 25
With the MAIN menu, the seven items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the Table. MAIN Menu Item Description MENU MAIN BRIGHT PICTURE-1 CONTRAST PICTURE-2 ASPECT INPUT PICT. POSIT. SCREEN GAMMA OPTION MIRROR LANGUAGE - 3M MP7640I | User Manual - Page 26
-1 Menu With the PICTURE-1 menu, the five items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the Table. PICTURE-1 Menu Item Description MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION COLOR BAL R COLOR BAL B SHARPNESS COLOR TINT 12 - 3M MP7640I | User Manual - Page 27
vertical frequencies of the signal will be displayed on the initial screen of the INPUT menu. Perform each operation in accordance with the instructions in the Table. MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION AUTO VIDEO HDTV SYNC ON G EXECUTE : SELECT Example : INPUT Menu (AUTO) INPUT - 3M MP7640I | User Manual - Page 28
can be performed. Please perform each operation in accordance with the instructions in the Table. MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION UP Screen is displayed when no signal has been inputted, or when spec signals are being inputted. TURN ON: Existing standard screens. Please make - 3M MP7640I | User Manual - Page 29
the instructions in the Table. MENU MAIN PICTURE-1 PICTURE-2 INPUT SCREEN OPTION VOLUME AUTO OFF WHISPER LAMP TIME FILTER projector lamp has been used since new. Reset LAMP TIME [Use this function only when the lamp has been replaced!]: Depress the RESET button for at least 3 seconds while lamp - 3M MP7640I | User Manual - Page 30
replacing the lamp, turn off the power, and unplug the power cord, then wait at least 45 minutes, in order to ensure that the lamp is properly cooled. Removing the lamp bulb while it is still hot could cause burns, or cause the lamp bulb to burst. WARNING The LCD projector uses a glass lamp bulb - 3M MP7640I | User Manual - Page 31
a message prompts you to replace the lamp when you power up the projector, the lamp needs to be replaced. (See "Related Messages" ( 34 ) and "Regarding the Indicator Lamps" ( 35 ) for details.) 1 Turn off the projector, and unplug the unolug the power cord. Allow the lamp bulb to cool for at least - 3M MP7640I | User Manual - Page 32
filter when you turn on the unit, the filter needs to be cleaned. (See "Related Messages" ( 34 ) and "Regarding the Indicator Lamps" ( 35 ) for details.) 1 Turn off the projector, and unplug the power cord 2 Apply a vacuum cleaner to the top of the air filter cover to clean the air filter Air - 3M MP7640I | User Manual - Page 33
be replaced. Please contact your local dealer, after confirming the model of your separately sold replacement air filter. 1 Turn off the projector, and for the unit. Please carefully read "Product Safety Instruction", in order to care for your projector correctly. • Do not use with air filter cover - 3M MP7640I | User Manual - Page 34
not touch the lens directly with your hand. Caring for the cabinet and remote control transmitter : Wipe lightly with gauze or a soft cloth. If the unit. Please carefully read "Product Safety Guide" in this manual, in order to care for your projector correctly. • Do not use cleaners or chemicals - 3M MP7640I | User Manual - Page 35
LAMP AFTER REPLACING LAMP, RESET THE LAMP TIMER. As lamp use has reached 2,000 hours, the power will soon be automatically turned OFF. (Note 2) Please immediately turn the power OFF, and follow the instructions in the "THE LAMP confirm the specs for this unit or the signal source specs. CHECK THE - 3M MP7640I | User Manual - Page 36
in accordance with the instructions within the Table. POWER LAMP TEMP indicator indicator indicator Description The orange lamp is lighted Turned OFF display is displayed, then please contact a sales store or a service company. Turned OFF There is a possibility that the interior portion has - 3M MP7640I | User Manual - Page 37
picture adjustments by changing the BRIGHT and/or CONTRAST settings, etc. 24 Change (by releasing) WHISPER mode. from the 28 Exchange the old lamp with a new lamp. 24, 25 Adjust the FOCUS and H PHASE settings. 15, 25 NOTE Although bright spots or dark spots may appear on the screen, this - 3M MP7640I | User Manual - Page 38
to change without notice. Item Product name Liquid crystal panel Panel size Drive system Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Ports Specification Liquid crystal projector 1.8 cm (0.7 type) TFT active matrix MP7640iɿ480,000 pixels - 3M MP7640I | User Manual - Page 39
Part Number UHB lamp, 150W (MP7640i 78-6969-9463-7 UHB lamp 8846-6 Remote control 78-8118-9121-3 Soft carry case 78-6969-9203-7 Not Included with Basic Packet Part Number -4 How to Order Please order these parts through your dealer, or contact 3M Customer Service at the following number : In U.S. - 3M MP7640I | User Manual - Page 40
operating this machine, please read this entire manual thoroughly. The 3MTM Multimedia Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages. The use of other replacement lamps, outdoor operation, or different voltages has
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
MP
7640i/MP
7740i
Multimedia Projector
Operator's Guide