3M MP7640I User Manual - Page 15

TURNING ON THE POWER Precautions Connect all devices to be used to the projector prior to turning on the power.  ʙ  WARNING When the power is ON, a strong light is emitted. Do not look into the lens. VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON OFF FREEZE VOLUME MUTE KEYSTONE Control panel LANP TENP POWER STANDBY/ON INPUT KEYSTONE RESET 1 Make sure that the power cord is firmly and correctly connected to the projector and outlet  2 Turn on the projector's power Set the power switch to [ | ] (ON). The projector will go to STANDBY mode and the POWER indicator will light to solid orange. POWER indicator KEYSTONE RESET POWERTENPLANP power switch NOTE Turn the power on/off in right order. • Power on the projector before the computer or video tape recorder. • Power off the projector after the computer or video tape recorder. 14 3 Press the STANDBY/ON button (control panel or remote control) • The projector begins warming up and the POWER indicator blinks green. • The POWER indicator stops blinking STANDBY/ON and lights to solid green once the projector's power is completely on. 4 Open the slide lens door The picture is projected.