AEG AutoSense Freestanding 60cm Washing Machine White L68480FL Product Manual - Page 14
Opening the door, At the end of the, programme, AUTO-OFF option
View all AEG AutoSense Freestanding 60cm Washing Machine White L68480FL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 www.aeg.com Before starting the new programme the appliance could drain the water. In this case, make sure that the detergent is still in the detergent compartment, if not fill the detergent again. 10.11 Opening the door While a programme (or the Finish In) operates, the appliance door is locked. The indicator is on. CAUTION! If the temperature and level of the water in the drum are too high, you cannot open the door. To open the door during the first minutes of the cycle (or when the Finish In operates) : 1. Touch the button Start/Pause to pause the appliance. 2. Wait until the indicator goes off. 3. You can open the door. 4. Close the door and touch the button Start/Pause again. The programme (or the Finish In) continues. 10.12 At the end of the programme • The appliance stops automatically. • The acoustic signal operates (if it is activated). • In the display comes on. • The indicator of the button Start/ Pause goes off. • The door lock indicator goes off. • You can open the door. • Remove the laundry from the appliance. Make sure that the drum is empty. • Press the button On/Off for some seconds to deactivate the appliance. • Close the water tap. • Keep the door and the detergent drawer ajar, to prevent the mildew and odours. The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator flashes to remind you to drain the water. • The door lock indicator is on. The indicator of button Start/Pause flashes. The door stays locked. • You must drain the water to open the door. Draining the water: 1. To drain the water. • Touch the button Start/Pause . The appliance drains the water and spins with the maximum spin speed for selected washing programme. • Alternatively, touch the button Spin to change the spin speed and then touch the button Start/ Pause. The appliance drains the water and spins. If you set , the appliance only drains. 2. When the programme is completed and the door lock indicator goes off, you can open the door. 3. Press the button On/Off for some seconds to deactivate the appliance. 10.13 AUTO-OFF option The AUTO-OFF stand-by option automatically deactivates the appliance to decrease the energy consumption. All the indicators and the display go off when : • You do not use the appliance for 5 minutes before you touch the Start/ Pause. Press the button On/Off to activate the appliance again. • After 5 minutes from the end of the washing programme. Press the button On/Off to activate the appliance again. The display shows the end of the last set programme. Touch the button Programmes if you want to set a new cycle.