AEG DynamicAir Freestanding 59.5cm Refrigerator Stainless Steel S63300KDX0 Pro - Page 11

Page 11 highlights

ENGLISH 11 The operation of the appliance goes with certain sounds (compressor and circulating sound). This not means a trouble, but a normal operation. The appliance operates discontinuously, so the stopping of compressor does not mean being no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit. Problem Possible cause Solution The appliance is noisy. The appliance is not supported properly. Check if the appliance stands stable (all feet and wheels should be on the floor). Refer to "Levelling". The buzzer sounds. The door is not closed The Alarm icon flash- correctly. ing. Refer to "Door open alarm". upper or lower square is shown in the temperature display. An error has occurred in measuring the temperature Call your service representative (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible) "dEMo" appears on the display. The appliance is in demonstration mode. Keep pressed approximately 10 sec the OK button since a long sound of buzzer is heard and the display shut off for a short while: appliance start works regularly. The compressor runs The Temperature regula- Set a warmer temperature. continuously. tor may be set incorrectly. The door is not closed correctly. Refer to "Closing the door". The door has been opened too frequently. Do not keep the door open longer than necessary. The food temperature is too high. Let the food temperature decrease to room temperature before storage. The room temperature is Decrease the room tem- too high. perature. Water flows inside the refrigerator. The water outlet is clog- Clean the water outlet. ged. Food prevent that water flows into the water collector. Make sure that food do not touch the rear plate.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.
The appliance operates discon-
tinuously, so the stopping of
compressor does not mean be-
ing no current. That is why you
must not touch the electrical
parts of the appliance before
breaking the circuit.
Problem
Possible cause
Solution
The appliance is
noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm icon flash-
ing.
The door is not closed
correctly.
Refer to "Door open
alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible)
“dEMo” appears on
the display.
The appliance is in dem-
onstration mode.
Keep pressed approxi-
mately 10 sec the OK but-
ton since a long sound of
buzzer is heard and the
display shut off for a short
while: appliance start
works regularly.
The compressor runs
continuously.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessa-
ry.
The food temperature is
too high.
Let the food temperature
decrease to room temper-
ature before storage.
The room temperature is
too high.
Decrease the room tem-
perature.
Water flows inside
the refrigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Food prevent that water
flows into the water col-
lector.
Make sure that food do
not touch the rear plate.
ENGLISH
11