AEG L69470VFL Product Manual - Page 11
Settings, Before First Use, Daily Use
View all AEG L69470VFL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
7.8 Finish In With this option you can set the number of hours in which you would like your washing programme to be completed. You can set from minimum 3 hours to maximum 20 hours. The display shows the number of hours and the indicator above the button Finish In is on. 8. SETTINGS 8.1 Extra Rinse With this option you can permanently have an extra rinse when you set a new programme. • To activate/deactivate this option touch the buttons Spin and Option at the same time until the indicator comes on/goes off. 8.2 Child Lock With this option you can prevent that the children play with the control panel. • To activate/deactivate this option, touch the buttons Temp. and Spin at the same time until the indicator comes on/goes off. Activate this option after you touch the button Start/Pause : the buttons are locked (except for the button On/Off ) . 9. BEFORE FIRST USE 1. Put a small quantity of detergent in the compartment for washing phase. 2. Set and start a programme for cotton at the highest temperature without laundry. 10. DAILY USE WARNING! Refer to Safety chapters. ENGLISH 11 7.9 Extra Rinse With this option you can add some rinses to a washing programme. Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on.1) This option stays active even when you switch off the appliance. 8.3 Acoustic signals The acoustic signals operate when: • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, touch the buttons Programmes and Temp. at the same time for 4 seconds. If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. This removes all possible dirt from the drum and the tub. 10.1 Loading the laundry 1. Open the appliance door 2. Put the laundry in the drum, one item at a time. 1) See in "Settings" how to activate this option.