AEG L69470VFL Product Manual - Page 15
Hints And Tips
View all AEG L69470VFL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
To open the door during the first minutes of the cycle (or when the Finish In operates) : 1. Touch the button Start/Pause to pause the appliance. 2. Wait until the indicator goes off. 3. You can open the door. 4. Close the door and touch the button Start/Pause again. The programme (or the Finish In) continues. 10.12 At the end of the programme • The appliance stops automatically. • The acoustic signal operates (if it is activated). • In the display comes on. • The indicator of the button Start/ Pause goes off. • The door lock indicator goes off. • You can open the door. • Remove the laundry from the appliance. Make sure that the drum is empty. • Press the button On/Off for some seconds to deactivate the appliance. • Close the water tap. • Keep the door and the detergent drawer ajar, to prevent the mildew and odours. The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator flashes to remind you to drain the water. • The door lock indicator is on. The indicator of button Start/Pause flashes. The door stays locked. 11. HINTS AND TIPS 11.1 The laundry load • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and coloured items. • Some coloured items can discolour with the first wash. We recommend ENGLISH 15 • You must drain the water to open the door. Draining the water: 1. To drain the water. • Touch the button Start/Pause . The appliance drains the water and spins with the maximum spin speed for selected washing programme. • Alternatively, touch the button Spin to change the spin speed and then touch the button Start/ Pause. The appliance drains the water and spins. If you set , the appliance only drains. 2. When the programme is completed and the door lock indicator goes off, you can open the door. 3. Press the button On/Off for some seconds to deactivate the appliance. 10.13 AUTO-OFF option The AUTO-OFF stand-by option automatically deactivates the appliance to decrease the energy consumption. All the indicators and the display go off when : • You do not use the appliance for 5 minutes before you touch the Start/ Pause. Press the button On/Off to activate the appliance again. • After 5 minutes from the end of the washing programme. Press the button On/Off to activate the appliance again. The display shows the end of the last set programme. Touch the button Programmes if you want to set a new cycle. that you wash them separately for the first times. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts. • Empty the pockets and unfold the items. • Turn inside out multilayered fabrics, wool and items with painted illustrations. • Remove hard stains.