AEG L6FBG942R User Manual - Page 14

Stains/Prewash, Rinse, Time Save, Soft Plus

Page 14 highlights

14 www.aeg.com The appliance empties the water out automatically after 18 hours approximately. 6.5 Stains/Prewash Press this button repeatedly to activate one of the two options. The relevant indicator goes on in the display. • Stains Select this option to add an anti-stain phase to a programme in order to treat heavily soiled or stained laundry with stain remover. Pour the stain remover into compartment . The stain remover will be added in the appropriate phase of the washing programme. This option is not available with a temperature lower than 40 °C. • Prewash Use this option to add a pre-wash phase at 30 °C before the washing phase. This option is recommended for heavily soiled laundry, especially if containing sand, dust , mud and other solid particles. The options can increase the programme duration. 6.6 Rinse With this button you can select one of the following options: • Extra rinse option This option adds a few rinses according to the selected washing programme. Use this option for persons allergic to detergent residues and in areas where the water is soft. This option increases slightly the programme duration. • Skipping wash phase - Rinse only option The appliance performs only the rinsing phase, the spinning and the draining phases of the selected programme. The corresponding indicator above the touch button illuminates. 6.7 Eco Set this option for slightly or normally soiled items washed at 30°C or higher temperatures. The appliance decreases the washing temperature and extends the washing time to obtain a good washing efficiency by saving energy. The display shows the indicator . If you select the Cotton programme at 40°C or 60°C and no other options are set, the display shows the indicator ; these are the standard cotton programmes, the most efficient programmes in terms of combined energy and water consumption. 6.8 Time Save With this option you can decrease the programme duration. • If your laundry is normally or lightly soiled, it may be advisable to shorten the washing programme. Touch this button once to decrease the duration. • In case of smaller load, touch this button twice to set an extra quick programme. The display shows the indicator . 6.9 Soft Plus Set the Soft Plus option to ensures perfect distribution of the fabric softener and improves the fabric softness. This option increases slightly the programme duration.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

The appliance empties
the water out
automatically after 18
hours approximately.
6.5
Stains/Prewash
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
Stains
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
. The stain remover
will be added in the appropriate
phase of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
Prewash
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
6.6
Rinse
With this button you can select one of
the following options:
Extra rinse option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
Skipping wash phase - Rinse only
option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
6.7
Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator
.
If you select the Cotton
programme at 40°C or 60°C
and no other options are set,
the display shows the
indicator
; these are
the standard cotton
programmes, the most
efficient programmes in
terms of combined energy
and water consumption.
6.8
Time Save
With this option you can decrease the
programme duration.
If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button
once
to decrease the duration.
In case of smaller load, touch this
button
twice
to set an extra quick
programme.
The display shows the indicator
.
6.9
Soft Plus
Set the Soft Plus option to ensures
perfect distribution of the fabric softener
and improves the fabric softness.
This option increases slightly
the programme duration.
www.aeg.com
14