AEG L6FBG942R User Manual - Page 19

Settings, Before First Use, Daily Use

Page 19 highlights

8. SETTINGS 8.1 Child Lock With this option you can prevent children from playing with the control panel. • To activate/deactivate this option, touch the Spin and the Stain/Prewash buttons simultaneously until the indicator comes on/goes off on the display. You can activate this option: • After you touch the Start/Pause button: all the buttons and the programme dial are deactivated (except On/Off button ). • Before you touch the Start/Pause button: the appliance cannot start. The appliance keeps the selection of this option after you switch it off. 8.2 Acoustic signals The acoustic signals operate when the programme is completed (sequence of sounds for about 2 minutes). 9. BEFORE FIRST USE 1. Make sure that all transit bolts have been removed from the appliance. 2. Make sure that the electrical power is available and the water tap is open. 3. Pour a small quantity of detergent into the compartment marked . 10. DAILY USE WARNING! Refer to Safety chapters. 10.1 Activating the appliance 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press the On/Off button for a few seconds to activate the appliance. A short tune sounds (if activated). The programme dial is automatically set on Cotton programme . ENGLISH 19 To deactivate/activate the acoustic signals, touch the Stain/Prewash and the Delay Start buttons simultaneously for about 6 seconds. If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 8.3 Permanent Extra Rinse With this option you can permanently have an extra rinse when you set a new programme. • To activate/deactivate this option touch the Temp. button and the Spin button simultaneously until relevant indicator comes on/goes off . The display shows above the 4. Set and start a programme for cotton at the highest temperature without any laundry in the drum. This removes all possible dirt from the drum and the tub. The display shows the maximum load, the default temperature, the maximum spin speed, the indicators of the phases making up the programme and the cycle duration. 10.2 Loading the laundry 1. Open the appliance door. 2. Shake the items before you put them in the appliance. 3. Put the laundry in the drum, one item at a time. Make sure not to put too much laundry in the drum.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

8.
SETTINGS
8.1
Child Lock
With this option you can prevent children
from playing with the control panel.
To
activate/deactivate
this option,
touch the Spin and the Stain/Prewash
buttons simultaneously until the
indicator
comes on/goes off
on
the display.
You can activate this option:
After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
8.2
Acoustic signals
The acoustic signals operate when the
programme is completed (sequence of
sounds for about 2 minutes).
To
deactivate/activate
the acoustic
signals, touch the Stain/Prewash and the
Delay Start buttons simultaneously for
about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.3
Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
To
activate/deactivate
this option
touch the Temp. button and the Spin
button simultaneously until relevant
indicator
comes on/goes off
.
The display shows
above the
9.
BEFORE FIRST USE
1.
Make sure that all transit bolts have
been removed from the appliance.
2.
Make sure that the electrical power is
available and the water tap is open.
3.
Pour a small quantity of detergent
into the compartment marked
.
4.
Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
10.
DAILY USE
WARNING!
Refer to Safety chapters.
10.1
Activating the appliance
1.
Connect the mains plug to the mains
socket.
2.
Open the water tap.
3.
Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
10.2
Loading the laundry
1.
Open the appliance door.
2.
Shake the items before you put them
in the appliance.
3.
Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry
in the drum.
ENGLISH
19