AEG L6FBG942R User Manual - Page 7

It is possible to see water

Get AEG L6FBG942R PDF manuals and user guides View all AEG L6FBG942R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

ENGLISH 7 Attach the sound barriers at a room temperature. 13. Pull up the appliance in vertical position. CAUTION! Do not use alcohol, solvents or chemical products. 9. Make sure to identify the different sizes and the positions of the sound barriers. Refer to the illustration: 14. Remove the power supply cable and the drain hose from the hose holders. A B • A (FRONT) = Front of the appliance • B (BACK) = Rear of the appliance 10. Remove the adhesive strip from the sound barriers. 11. Attach the four barriers to bottom of the appliance. 12. Refer to the illustration. Make sure that the barriers are securely attached. It is possible to see water flowing from the drain hose. This is due to the testing with the appliance of water in factory. 15. Remove the three bolts by using the key supplied with the appliance. x4 A 16. Pull out the plastic spacers. 17. Put the plastic caps, that you find in the user manual bag, in the holes. B

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
CAUTION!
Do not use alcohol, solvents
or chemical products.
9.
Make sure to identify the different
sizes and the positions of the sound
barriers. Refer to the illustration:
A
B
•
A
(FRONT) = Front of the
appliance
•
B
(BACK) = Rear of the appliance
10.
Remove the adhesive strip from the
sound barriers.
11.
Attach the four barriers to bottom of
the appliance.
12.
Refer to the illustration. Make sure
that the barriers are securely
attached.
x4
A
B
Attach the sound barriers at
a room temperature.
13.
Pull up the appliance in vertical
position.
14.
Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see water
flowing from the drain hose.
This is due to the testing
with the appliance of water
in factory.
15.
Remove the three bolts by using the
key supplied with the appliance.
16.
Pull out the plastic spacers.
17.
Put the plastic caps, that you find in
the user manual bag, in the holes.
ENGLISH
7