AEG L7FEE965R User Manual - Page 13
Stains/Prewash
View all AEG L7FEE965R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Touch this button repeatedly until the desired temperature value appears on the display. When the display shows the indicators and , the appliance does not heat the water. 6.4 Spin When you set a programme, the appliance automatically sets the maximum spin speed allowed. Touch repeatedly this button to: • Decrease the spin speed. The display shows only the spin speeds available for the set programme. • Activate the Rinse Hold option. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum. The display shows the indicator . The door stays locked and the drum turns regularly to reduce creasing. You must drain the water to unlock the door. If you touch the Start/Pause button, the appliance performs the spinning phase and drains the water. The appliance empties the water out automatically after 18 hours approximately. • Activate the Quiet option. The intermediate and the final spinning phases are suppressed and the programme ends with water in the drum. This helps to reduce creasing. The display shows the indicator . The door stays locked. The drum turns regularly to reduce creasing. You must drain the water to unlock the door. As the programme is very quiet, it is suitable for use at night time when cheaper electricity tariffs are available. In some programmes the rinses are performed with more water. ENGLISH 13 If you touch the Start/Pause button, the appliance performs the only draining phase. The appliance empties the water out automatically after 18 hours approximately. • Drain only option (Skipping the wash, rinse and spin phases) . The appliance performs the only draining phase of the selected washing programme. The display shows the indicator (cold), and the indicator (no spin) and the indicator . • Spin only option (Skipping the wash and rinse phases) . The appliance performs only the spinning phase of the selected washing programme. The display shows the indicator (cold), the phase indicator and the spin speed. If it is necessary to reduce the spin speed, select a programme with a lower spin speed as default. 6.5 Stains/Prewash Press this button repeatedly to activate one of the two options or both. The relevant indicator goes on in the display. • Stains Select this option to add an anti-stain phase to a programme in order to treat heavily soiled or stained laundry with stain remover. Pour the stain remover into compartment . The stain remover will be added in the appropriate phase of the washing programme. This option is not available with a temperature lower than 40 °C. • Prewash Use this option to add a pre-wash phase at 30 °C before the washing phase.