AEG L7FEE965R User Manual - Page 7
Installation on suspended, flooring, Positioning and levelling, The inlet hose - manual
View all AEG L7FEE965R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH 7 2. Loosen or tighten the feet to adjust the level. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 10. Pull out the plastic spacers. 11. Put the plastic caps, that you find in the user manual bag, in the holes. x4 We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.2 Installation on suspended flooring Suspended wooden floors are particularly susceptible to vibration. To limit vibration we recommend placing a waterproof wooden panel, at least 15 mm thick, under the appliance. It should be screwed to at least 2 floor beams and should extend beyond the front feet. If possible, install the appliance where the floor is more stable. 3.3 Positioning and levelling 1. Install the appliance on a flat hard floor. Make sure that carpets do not stop the air circulation below the appliance. Make sure that the appliance does not touch the wall or other units. The appliance must be level and stable. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. 3.4 The inlet hose 1. Connect the water inlet hose to the back of the appliance. 2. Position it toward left or right depending on the position of the water tap.